The
MSDS format adheres to the standards and regulatory requirements
of
the United States and may not meet regulatory requirements
in
other countries.
DuPont
Page 1
Material
Safety Data Sheet
----------------------------------------------------------------------
"KRYTOX"
LVP Fluorinated Grease
5806PP
Revised 5-NOV-1993
----------------------------------------------------------------------
----------------------------------------------------------------------
CHEMICAL
PRODUCT/COMPANY IDENTIFICATION
----------------------------------------------------------------------
Material
Identification
"KRYTOX"
is a registered trademark of DuPont.
Corporate
MSDS Number : DU002667
Company
Identification
MANUFACTURER/DISTRIBUTOR
DuPont
Chemical Solutions Enterprise
1007
Market Street
Wilmington,
DE 19898
PHONE
NUMBERS
Product
Information : 1-800-441-7515 (outside the U.S.
302-774-1000)
Transport
Emergency : CHEMTREC 1-800-424-9300(outside U.S.
703-527-3887)
Medical
Emergency : 1-800-441-3637 (outside the U.S.
302-774-1000)
----------------------------------------------------------------------
COMPOSITION/INFORMATION
ON INGREDIENTS
----------------------------------------------------------------------
Components
Material
CAS Number %
Perfluoroalkylether
60164-51-4 70
Polytetrafluoroethylene
9002-84-0 30
----------------------------------------------------------------------
HAZARDS
IDENTIFICATION
----------------------------------------------------------------------
#
Potential Health Effects
ANIMAL
DATA:
Perfluoroalkylether:
Inhalation
4 hour ALC: 19.54 mg/l in rats
Skin
absorption ALD: >17,000 mg/kg in rats
Oral
ALD: >25,000 mg/kg in rats
The
product contains a mild and a slight eye irritant.
Polytetrafluoroethylene
is not a skin irritant in animals. A
single
inhalation exposure to perfluoroalkylether caused
nonspecific
effects such as respiratory irritation. Toxic
effects
described in animals exposed to decomposition
products
of the product formed above 260 degC (500 degF)
5806PP
DuPont Page 2
Material
Safety Data Sheet
(HAZARDS
IDENTIFICATION - Continued)
include
lung irritation, irregular respiration, tremors and
increased
liver weight. Pulmonary edema and death occurred
in
rats exposed to the decomposition products of
perfluoroalkylether
formed at around 290 degC (554 degF). A
single
inhalation exposure to polytetrafluoroethylene caused
irritation
of the lungs in animals. Repeated ingestion
exposures
to polytetrafluoroethylene caused no significant
toxicological
effects; long-term ingestion exposure caused
altered
white blood cell counts.
HUMAN
HEALTH EFFECTS OF OVEREXPOSURE:
Skin
contact may cause skin irritation with discomfort or
rash.
Prolonged skin contact may cause redness and
inflammation
of the hair follicles without skin
sensitization.
Eye
contact may cause eye irritation with discomfort,
tearing
or blurring of vision.
Inhalation
of fluorine compounds released as decomposition
products
at around 290 degC (554 degF) may cause lung
irritation
and pulmonary edema which require medical
treatment.
Inhalation of burning material or smoke from
cigarettes
or tobacco contaminated with this product may
cause
polymer fume fever. Polymer fume fever is a flu-like
illness
with fever, chills and sometimes cough, which occurs
several
hours after exposure and subsides within 24-48 hours
even
in the absence of treatment. Polymer fume fever does
not
cause permanent injury and the effects are not
cumulative.
Carcinogenicity
Information
None
of the components present in this material at concentrations
equal
to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH
as
a carcinogen.
----------------------------------------------------------------------
FIRST
AID MEASURES
----------------------------------------------------------------------
First
Aid
INHALATION
If
inhaled, remove to fresh air. If not breathing, give
artificial
respiration. If breathing is difficult, give oxygen.
Call
a physician.
SKIN
CONTACT
Flush
skin with water after contact. Wash contaminated clothing
before
reuse.
5806PP
DuPont Page 3
Material
Safety Data Sheet
(FIRST
AID MEASURES - Continued)
EYE
CONTACT
In
case of contact, immediately flush eyes with plenty of water
for
at least 15 minutes. Call a physician.
INGESTION
If
swallowed, do not induce vomiting. Immediately give 2 glasses
of
water. Never give anything by mouth to an unconscious person.
Call
a physician.
Notes
to Physicians
Activated
charcoal mixture may be administered. To prepare
activated
charcoal mixture, suspend 50 grams activated charcoal in
400
mL water and mix thoroughly. Administer 5 mL/kg, or 350 mL
for
an average adult.
----------------------------------------------------------------------
FIRE
FIGHTING MEASURES
----------------------------------------------------------------------
Flammable
Properties
Flash
Point : Does not ignite
Method
: PMCC
Non-combustible
Extinguishing
Media
As
appropriate for combustibles in area.
Fire
Fighting Instructions
Wear
self-contained breathing apparatus. Wear full protective
equipment.
Decomposition
at flame temperatures may form toxic fluorine
compounds.
Avoid breathing decomposition products.
----------------------------------------------------------------------
ACCIDENTAL
RELEASE MEASURES
----------------------------------------------------------------------
Safeguards
(Personnel)
NOTE:
Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL)
sections
before proceeding with clean-up. Use appropriate
PERSONAL
PROTECTIVE EQUIPMENT during clean-up.
Accidental
Release Measures
Place
in container for disposal. Remove source of heat and
flame.
5806PP
DuPont Page 4
Material
Safety Data Sheet
----------------------------------------------------------------------
HANDLING
AND STORAGE
----------------------------------------------------------------------
Handling
(Personnel)
Avoid
contact with eyes. Avoid contact with skin. Wash
thoroughly
after handling. Do not store or consume food, drink or
tobacco
in areas where they may become contaminated with this
material.
Storage
Keep
container tightly closed. Do not store or consume food,
drink
or tobacco in areas where they may become contaminated with
this
material.
Keep
away from heat and flames to avoid decomposition
products.
----------------------------------------------------------------------
EXPOSURE
CONTROLS/PERSONAL PROTECTION
----------------------------------------------------------------------
Engineering
Controls
Keep
container tightly closed.
Keep
away from heat and flames.
#
Personal Protective Equipment
EYE/FACE
PROTECTION
Wear
safety glasses or coverall chemical splash goggles.
RESPIRATORS
Wear
NIOSH approved respiratory protection as appropriate.
PROTECTIVE
CLOTHING
Where
there is potential for skin contact have available and
wear
as appropriate, impervious gloves, apron, pants, and
jacket.
Exposure
Guidelines
Applicable
Exposure Limits
Polytetrafluoroethylene
PEL
(OSHA) : None Established
TLV
(ACGIH) : None Established
AEL
* (DuPont) : 10 mg/m3, 8 Hr. TWA, total dust
5
mg/m3, 8 Hr. TWA, respirable dust
*
AEL is DuPont’s Acceptable Exposure Limit. Where governmentally
imposed
occupational exposure limits which are lower than the AEL
are
in effect, such limits shall take precedence.
5806PP
DuPont Page 5
Material
Safety Data Sheet
----------------------------------------------------------------------
PHYSICAL
AND CHEMICAL PROPERTIES
----------------------------------------------------------------------
Physical
Data
Melting
Point : 320 C (608 F)
Solubility
in Water : Negligible WT%
pH
: Neutral
Odor
: Odorless
Form
: Solid, waxy grease
Color
: White
Specific
Gravity : 1.89-1.93 @ 24 deg C (75 deg F)
----------------------------------------------------------------------
STABILITY
AND REACTIVITY
----------------------------------------------------------------------
Chemical
Stability
Stable.
Incompatibility
with Other Materials
None
reasonably foreseeable.
Polymerization
Polymerization
will not occur.
Other
Hazards
Decomposition:
Heating above 260-290 deg C (500-554 deg F)
may
form potentially toxic fluorine compounds.
Depolymerization
may occur in the presence of some metal
oxides
at temperatures above 288 deg C (550 deg F).
Decomposition
occurs at increasing rates as temperature
is
raised above 355 deg C (670 deg F).
----------------------------------------------------------------------
DISPOSAL
CONSIDERATIONS
----------------------------------------------------------------------
Waste
Disposal
Treatment,
storage, transportation, and disposal must be in
accordance
with applicable Federal, State/Provincial, and Local
regulations.
Do not flush to surface water or sanitary sewer
system.
5806PP
DuPont Page 6
Material
Safety Data Sheet
----------------------------------------------------------------------
TRANSPORTATION
INFORMATION
----------------------------------------------------------------------
Shipping
Information
DOT
Proper
Shipping Name : Not regulated.
Shipping
Containers
2,
8 oz. polyethylene tubes
1
lb. double wall jars (polypropylene inner; polystyrene
outer)
5
- 15 lb. polyethylene pails
50
- 75 lb. white high density polyethylene pails
----------------------------------------------------------------------
REGULATORY
INFORMATION
----------------------------------------------------------------------
U.S.
Federal Regulations
TSCA
Inventory Status : Reported/Included.
TITLE
III HAZARD CLASSIFICATIONS SECTIONS 311, 312
Acute
: Yes
Chronic
: No
Fire
: No
Reactivity
: No
Pressure
: No
----------------------------------------------------------------------
OTHER
INFORMATION
----------------------------------------------------------------------
NFPA,
NPCA-HMIS
NPCA-HMIS
Rating
Health
: 1
Flammability
: 0
Reactivity
: 0
Personal
Protection rating to be supplied by user depending on use
conditions.
----------------------------------------------------------------------
The
data in this Material Safety Data Sheet relates only to the
specific
material designated herein and does not relate to use in
combination
with any other material or in any process.
Responsible
for MSDS : MSDS Coordinator
>
: DuPont Chemical Solutions Enterprise
Address
: Wilmington, DE 19898
Telephone
: (800) 441-7515
#
Indicates updated section.
5806PP
DuPont Page 7
Material
Safety Data Sheet
(Continued)
This
information is based upon technical information believed to be
reliable.
It is subject to revision as additional knowledge and
experience
is gained.
End
of MSDS